Drop it… wide

A few years back we started playing around with wider bars on our mountain bikes. Trendy? Yes. Beneficial? Absolutely. Turns out the same benefits extend to Drop Bars which is why we designed the Coast to give you more stability, further control, and extra comfort on your gravel or city bike.


wide and wider

The Coast leverages the known benefits of wider mountain bike bars, featuring 48cm and 52cm options - because like any good burrito, width is important.


CONTROL FREAKS

A wider bar with shallow drop not only provides ergonomic relief to the wrists and neck it also makes your bike more stable. This helps when you're moving from the hoods to the drops and allows you to get more playful with the bike (while having less "oh s***" moments).

Lifetime Warranty

We've always got
your back

Fast Shipping Options

Get your parts for the
weekend ride

Unparalleled Service

Seriously, we're here
for you

Pacific NW Approved

All Season reliability, tested in the mountains


don't forget your stem!

For the full benefits of wider bars we recommend pairing the Coast with a shorter stem. As a general rule of thumb, for every 20mm of increased bar width we recommend shortening your stem by 10mm.

reach, drop and flare

65mm Reach - A short distance designed in tandem with the shallow drop, and exaggerated flare, makes switching body positions easy and keeps you feeling fresher on longer rides.

105mm Drop - This is a shallower drop number than traditional road bars - it's for when being aerodynamic isn't everything but being comfortable IS.

20° Flare - Combined with the shallow drop the 20° flare means more comfortable riding positions for your wrists and ease when moving from the grips to the hoods and back again.

How Does Travel Adjust work?

Our travel adjust system allows for a total of 30mm travel reduction in 5mm increments. If you were riding that line between travel sizes you can now fine-tune the perfect fit by following the easy directions below:

  1. Begin by lowering your dropper at or below the desired travel length (just make sure it’s not fully extended!)
  2. Unthread the midcap with your hand and slide it up to reveal the white DU Bushing.
  3. You’ll see negative numbers with corresponding notches machined into the post (each # represents decreasing travel.
  4. Slide the DU bushing up and rotate it to align the black arrow with the amount of travel you would like to reduce, then seat the arrow into the machined groove. (Make sure it’s fit securely into these notches!)
  5. After pushing the DU Bushing back down, lower the midcap and hand tighten (no need to go overboard!) and ride off into the sunset with the perfect travel for you.

How Does Travel Adjust work?

Our travel adjust system allows for a total of 30mm travel reduction in 5mm increments. If you were riding that line between travel sizes you can now fine-tune the perfect fit by following the easy directions below:

  1. Begin by lowering your dropper at or below the desired travel length (just make sure it’s not fully extended!)
  2. Unthread the midcap with your hand and slide it up to reveal the white DU Bushing.
  3. You’ll see negative numbers with corresponding notches machined into the post (each # represents decreasing travel.
  4. Slide the DU bushing up and rotate it to align the black arrow with the amount of travel you would like to reduce, then seat the arrow into the machined groove. (Make sure it’s fit securely into these notches!)
  5. After pushing the DU Bushing back down, lower the midcap and hand tighten (no need to go overboard!) and ride off into the sunset with the perfect travel for you.

Specs: Coast drop bar

measurements

CLAMP DIAMETER

31.8mm

Weight

48cm
346g

52cm
357g

color

Dual finish sandblast/polished black anodized

Manuals

handlebars

coast drop bar

FAQ

Which width is best for me?

Bar width comes down to personal preference and fit, but much like mountain bike bars, we are really digging the wide bar shift. Most people go up 20mm from their current set-up to start.

Which PNW levers are compatible?

For drop/road bike bars we recommend our Drop Bar lever.

Which stem diameter is compatible with these bars?

Our Coast bars are compatible with 31.8 diameter clamp stems, including our 31.8 Coast and Range stems.

Do you recommend changing stem length when going to a wider bar?

YES. To encourage a good pairing with our wider drop bar we recommend sizing down. There is no exact rule that will tell you which size is best and in the end the decision will come down to personal preference. However, a basic guideline is for every 20mm wider your bar is, your stem should be 10mm shorter. For example, if you're currently riding a 42cm bar and your stem is 110mm, the 80mm Coast Stem would be our recommendation if you select the 48cm Coast Drop Bar.

Warranty

PNW Lifetime Warranty

Do we have your back? Of course. If anything goes wrong, we're here to do everything we can to ensure you're taken care of.

Reviews

This bar has exceeded my expectations. It’s WIDE and comfortable.

Gary J. Verified Buyer

They handle very well while in the drops and I love how shallow they are, it really lets me put my body where I want it.

Corey D.  Verified Buyer

First bar I've ever had that doesn't cause pain or numbness, fits me perfectly!

Jorgen H. Verified Buyer

Gallery